The CH-6130/6140 charge converter is a simplified type of charge amplifier converting charge signal to voltage.
It can be connected directly to an input BNC connector of a CCLD applicable equipment such as FFT analyzer or vibration comparator, enabling direct connection of a charge output pickup without suing a box type amplifier.
- Compact, light weight, simple charge amplifier.
- Can be easily connected to a sensor input connector (BNC) of CCLD appliable equipment such as FFT analyzer.
- Two models are available. Make your selection according to the sensitivity of the input sensor; Conversion coefficient at 160 Hz: CH-6130 1 mV/pC, CH-6140 10 mV/pC.
Specifications
| Frequency Range | 2 Hz to 45 kHz (±3 dB) 5 Hz to 15 kHz (±0.5 dB) (The gain at 160 Hz is made 0 dB.) |
| Output Signal (Voltage) | 10 Vp-p or more |
| Output Bias | 10 VDC ±2 VDC |
| Noise | Maximum 0.05 pC (rms) |
| Driving Power Supply | Voltage: 18 to 36V Constant current: 2.0 to 20 mA |
| Connector | Input: Miniature connector, Screw No.10-32 UNF, Output: C02 (BNC) connector |
| Structure | I/O connectors, Case ground |
| Case Material | Stainless (SUS303) |
| Operating Temperature Range | 0 to +50°C |
| Operating Humidity Range | 85% RH or less |
| Outer Dimensions | φ15 × 40 mm |
| Weight | Approximately 20 g |
Notes
There are no additional notes for this product.
Related Products
CH-1200A
Charge Amplifier
